How to sew metal button without using a needle and thread?

 Here are a few methods to sew metal buttons without using a needle and thread:


1. **Metal Button Glue**: Use a strong adhesive specifically designed for attaching metal buttons. Apply a small amount of the glue to the back of the button and press it firmly onto the fabric. Allow the glue to fully dry and cure according to the manufacturer's instructions.


2. **Metal Button Rivets**: Use a rivet setting tool to attach metal button rivets. Place the button in the desired location, insert the rivet prong through the fabric, and use the rivet setter to secure the rivet in place, metal button factory  flattening the prong on the underside of the fabric.


3. **No-Sew Button Tape**: Purchase a length of no-sew button tape. Peel off the adhesive backing and place the button into the designated opening on the tape. Press the tape firmly onto the fabric to adhere it in place.


4. **Sew-On Button Backing**: Use a sew-on button backing that has pre-attached prongs or loops. Place the button in the desired location, then use pliers to bend the prongs or loops through the fabric to secure the button.


5. **Fabric Stiffener/Glue**: Apply a small amount of fabric stiffener or crafting glue to the underside of the fabric where the button will be placed. Allow it to fully dry, then attach the button using the glue or stiffened fabric as an adhering surface.


The best method will depend on the type of fabric, the weight of the button, and the desired permanence of the attachment. Be sure to test the chosen technique on a scrap of similar fabric before applying it to your final project.



评论

此博客中的热门博文

How to iron lyocell fabric​?

What are daily colored contact lenses?

How did the introduction of barbed-wire fences benefit farmers​?